shielded power inductors C lps8045 document 968-1 document 968-1 revised 09/02/15 core material ferrite weight 0.88 C 1.1 g environmental rohs compliant, halogen free terminations rohs compliant matte tin over nickel over silver. other terminations available at additional cost. ambient temperature C40c to +85c with (40c rise) i rms current. maximum part temperature +125c (ambient + temp rise). derating . storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 250/7 reel; 1000/13 reel; plastic tape: 16 mm wide, 0.28 mm thick, 12 mm pocket spacing, 4.83 mm pocket depth recommended pick and place nozzle od: 8 mm; id: 4 mm pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . ? inductance values from 6.8 to 1000 h ? low dcr; excellent current handling 1. when ordering, please specify termination and packaging codes: lps8045b-105m rc termination: r = rohs compliant matte tin over nickelover silver. special order, added cost: q = rohs tin-silver-copper (95.5/4/0.5) or p = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (250 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (1000 parts per full reel). 2. inductance at 100 khz, 0.1 vrms, 0 adc. 3. dc current at 25c that causes the specifed inductance drop from its value without current. click for temperature derating information . 4. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum ratings. click for temperature derating information . 5. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. inductance 2 dcr (ohms) srf typ i sat (a) 3 i rms (a) 4 part number 1 20% (h) typ max (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise lps8045b-682mr_ 6.8 0.059 0.075 63 3.6 3.9 4.0 1.80 2.40 lps8045b-103mr_ 10 0.073 0.090 49 2.8 3.2 3.3 1.55 2.15 lps8045b-153mr_ 15 0.092 0.110 23 2.5 2.7 2.7 1.35 1.85 lps8045b-223mr_ 22 0.102 0.130 21 2.0 2.3 2.4 1.25 1.75 lps8045b-333mr_ 33 0.121 0.145 12 1.8 2.0 2.1 1.20 1.60 lps8045b-473mr_ 47 0.153 0.179 10 1.6 1.7 1.8 1.10 1.50 lps8045b-683mr_ 68 0.193 0.223 8.7 1.2 1.3 1.4 0.95 1.35 lps8045b-104mr_ 100 0.297 0.342 6.5 1.0 1.1 1.1 0.78 1.10 lps8045b-154mr_ 150 0.379 0.442 5.0 0.88 0.93 0.95 0.70 0.95 lps8045b-224mr_ 220 0.564 0.662 4.3 0.70 0.74 0.77 0.60 0.82 lps8045b-334mr_ 330 0.834 0.950 3.0 0.52 0.58 0.61 0.48 0.65 lps8045b-474mr_ 470 1.28 1.45 2.5 0.43 0.48 0.50 0.39 0.53 lps8045b-684mr_ 680 1.88 2.23 2.2 0.33 0.39 0.43 0.32 0.44 lps8045b-105mr_ 1000 2.92 3.22 1.3 0.31 0.34 0.36 0.23 0.32
document 968-2 document 968-2 revised 09/02/15 l vs current typical l vs frequency inductance (h) 4 10 100 1000 100 h 330 h 1000 h 33 h 10 h 0.1 1 100 10 frequenc y (mhz) 100 h 150 h 220 h 330 h 470 h 680 h 1000 h 68 h 47 h 33 h 22 h 15 h 10 h 6.8 h 0.01 0.1 10 1 current (a) inductance (h) 4 10 100 1000 dimensions are in inches mm 0.1772 0.008 4,500,20 0.315 0.003 8,00 0,076 0.315 0.003 8,00 0,076 * * dash n umber inter nal code b xxx x recommended land p attern 0.339 8,61 0.205 5,21 0.134 3,40 0.126 3,19 0.126 3,19 0.117 2,98 0.117 2,98 0.072 1,84 0.072 1,84 dimensions are of the case not including the ter mination. fo r maximum ov erall dimensions including the ter mination, add 0.005 i n/0,13 mm. fo r optional tin-lead and tin- silv er-copper ter minations , dimensions are fo r the mounted par t. dimensions bef ore mounting can be an additional 0.005 inc h/0,13 mm). * lps8045 shielded power inductors
|